Quick Answer: How Do I Clear The Error Code On My HP Printer?

How do I get my HP printer out of error state?

How do I get my printer out of an error state?Make ports settings changes.

Press the Windows logo key + R on your keyboard > type devmgmt.msc and hit Enter to open the Device Manager.

Make sure that your printer is Online.

Reinstall the printer driver.

Set the Print Spooler service to automatic.

Update Windows..

How do I hard reset my HP printer?

To restore your HP printer to factory-default settings, follow these steps.Turn the printer off. Disconnect the power cable from the printer for 30 seconds and then reconnect.Turn the printer on while you press and hold the Resume button for 10-20 seconds. The Attention light turns on.Release the Resume button.

Why is my printer saying cartridge error?

Sometimes Error message on your HP Printer will prevent you from printing until you fix that error. If you see an error message on your printer saying that you have an incorrect ink cartridge or a flashing cartridge light its means a bad color cartridge or you are told to remove that color cartridge.

Why is my printer not printing even though it has ink?

Check Your PrintHead 1. If switching ink cartridges doesn’t work, the next thing to check is your printhead. Make sure your printheads aren’t clogged. Most printers have an automatic printhead cleaning feature but if you’re able to remove the printhead from your printer, you can clean it manually.

How do I get my printer back online?

Go to the Start icon on the bottom left of your screen then choose Control Panel and then Devices and Printers. Right click the printer in question and select “See what’s printing”. From the window that opens choose “Printer” from the menu bar at the top. Select “Use Printer Online” from the drop down menu.

Why has my HP printer suddenly stopped working?

Make sure your devices are properly connected with each other, and the network or the cable you use to connect these devices is normal. You can also try restarting your HP printer. Turn it off completely and unplug the power cord, leave it for a couple of minutes, and then plug the cord back and power on the printer.

Why does my HP printer Say error code?

An issue most commonly associated with driver or printer cable problems, turning the printer off and on should see this error message disappear. A hardware problem may be the reason the error message persists. … Indicating a paper jam, this code can be removed by following the guidance on the printer screen.

How do I clear the HP check cartridge error code?

How to Clear an HP Check Printer Cartridge Error CodeTurn on the printer and open the cover where the ink cartridge is located. … Place the ink cartridge back in the carriage. … Turn the HP printer on. … Turn on the printer and open the cover where the ink cartridge is located. … Remove the cartridge and use a clean, lint-free, dry cloth to gently wipe the contacts.More items…

How do you fix printer in error state?

Printer in error stateIf your printer’s status displays “Printer in error state,” there may be a problem with the printer itself.Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn’t open and the paper isn’t jammed.

Why am I getting a printer error?

Corrupt data in the spool/printing tray might be causing this service to stop. The other most probable reason for the printing error is the connection between your computer and the printer. … This can be the printer drivers or the USB port drivers.

Why my printer is not working?

First, make sure the printer is on and has paper in the tray. … Next, check to make sure the printer cable is properly connected to both the computer and the printer. If you still can’t print, check to make sure the printer is not set to offline mode. Go to Start, Printers and Faxes.